Veer Impex is a well-known exporter and manufacturer of Waspaloy buttweld fittings and a high-end industry that exclusively deals with the highest-quality raw materials and other general products. Waspaloy Butt Weld Fittings have grown in popularity in recent years, and they are designed to meet national and international quality standards and norms. Please get in touch with us with any questions or concerns.
Waspaloy can be hot welded across the temperature up to 980ºC; cold working for this grade is done by hydroforming, drawing, spinning, bending, and rolling. When machining, the waspaloy qualities perform well other than nickel-based alloys, which are difficult to machine, and special instruction must be followed for good results. However, Waspaloy grades do not form good properties in highly high-stress areas because the high strength of welds is lower than heat-treated material. In more precise words, waspaloy can show hot short potential and is critical to strain cracking. Therefore, it is significant that solution-treated welding is made on material, and then after that e solution treatment takes place along with the weld. Waspaloy is an age-hardening nickel-molybdenum-based alloy with exceptional corrosion and oxidation resistance. It is often used at temperatures up to 871oC. At temperatures ranging from 600 to 650oC, Waspaloy has higher creep and rupture strength than 718 alloys.
Waspaloy alloy buttweld fittings are applicable across many different industries such as oil and gas industries, paper and pulp industries, chemical industries, sea, and marine components, etc.
STANDARD | WERKSTOFF NR. | UNS | SIS | AFNOR | EN |
Waspaloy | 1.4547 | S31254 | 2378 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
Specification : | ASTM A403 / ASME SA403 |
Dimension Standard : | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
Size : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
Thickness : | Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS |
Bending Radius : | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
Type : | Seamless / Welded / Fabricated |
Grade | Ni | Cr | Mo | Cu | N | C | Mn | Si | P | S |
SMO 254 | 17.5 - 18.5 | 19.5 - 20.5 | 6 - 6.5 | 0.5 - 1 | 0.18 - 0.22 | 0.02 max | 1 max | 0.8 max | 0.03 max | 0.01 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
The full identification of the pipe fittings should be continuously marked down its whole length, including :
Waspaloy piggable bend supplier, astm a403 254 two joint fittings, asme sa403 Waspaloy stainless steel pipe fittings, price of stainless steel buttweld fittings Waspaloy, Waspaloy reducing elbow supplier, 3d elbow grade Waspaloy price list, alloy Waspaloy pipe fittings manufacturers in india, Waspaloy pipe reducer price, Waspaloy pipe fittings catalogue, Waspaloy pipe fittings suppliers in chennai, Waspaloy buttweld fittings manufacturer in mumbai, Waspaloy 90 deg buttweld elbow supplier, Waspaloy 5d elbow, austenitic stainless steel Waspaloy butt weld fittings, Waspaloy two halve fittings supplier, Waspaloy short radius elbow supplier, Waspaloy butt weld fittings supplier in india, smo 254 pipe fittings suppliers, Waspaloy seamless pipe fittings, smo 254 pipe nipple supplier, smo 254 buttweld fittings price list, Waspaloy long radius bend, Waspaloy pipe fittings manufacturers in india, Waspaloy pipe fittings price list, stainless steel Waspaloy eual cross, Waspaloy seamless buttweld elbow price list in india, alloy Waspaloy pipe fittings manufacturer, stainless steel Waspaloy long radius elbow, stainless steel Waspaloy pipe elbow price, Waspaloy buttweld fittings price list, Waspaloy pipe fittings manufacturer in mumbai, austenitic stainless steel Waspaloy pipe fittings, Waspaloy buttweld elbow supplier in mumbai, Waspaloy pipe elbow supplier, Waspaloy butt weld fittings supplier in india.
Seamless / Welded Pipe Fittings With Mill And Third Party Test Certificate.
Waspaloy Pipe Fittings Price List
Request the latest Waspaloy Buttweld Fittings Price List. Please Call +91 9167014755 / +91 9082006249 or Send an Email to [email protected] for SMO UNS S31254, 1.4547 Pipe Fittings Ready stock information and updated price list.